Relationship between the Height of Alveolar Bone Resorption and Sex and Age in Adolescents / 法医学杂志

OBJECTIVES@#To explore the relationship between the height of alveolar bone resorption and sex and age in the adolescent dentition.@*METHODS@#Multi-slice computed tomography (MSCT) was used to measure the height of alveolar bone resorption at labial, lingual, mesial and distal sites of teeth in 149 adolescents aged from 10 to 20 years. SPSS 25.0 software was used to analyze the relationship between the height of alveolar bone resorption and sex and age.@*RESULTS@#There was no significant difference in the height of alveolar bone resorption between sex (P>0.05). The height of alveolar bone resorption was positively correlated with age in all types of teeth. The model constructed by combining the alveolar bone resorption height data of four sites (y=2.569x1+3.106x2+4.108x3+1.451x4-0.082, R2max=0.756)had a better ability to infer age than that of combining two sites (y=5.942x1+4.489x2+0.612, R2max=0.706) and a single site (R2max=0.638).@*CONCLUSIONS@#The height of alveolar bone resorption is positively correlated with the age of adolescents. The combination of four sites has a stronger ability to infer the relationship between the height of alveolar bone resorption and age in adolescents and has higher accuracy in practical application.

Digital analysis of the correlation between gingival thickness and alveolar bone thickness in the maxillary anterior teeth region / 中华口腔医学杂志

Objective: To measure the labial gingival thickness and bone lamella thickness in the maxillary anterior area using digital method, and to analyze the correlation between the two, so as to provide a reference for esthetic restoration and implantation treatment of the upper anterior area. Methods: Fifty-seven patients [23 males, 34 females, (25.8±4.5) years old] who planned to receive posterior dental implant restoration were recruited randomly with the inclusion and exclusion criteria in Department of Prosthodontics, School of Stomatology, The Fourth Military Medical University from May 2020 to October 2020. The 3Shape software was used to perform oral scanning, and cone beam CT (CBCT) was taken for each patient. The image data was fitted and registered by the 3Shape software. The gingival thickness at 2 mm below the gingival margin, bone thickness and gingival thickness at 2 and, 4 mm below the crest of the labial alveolar crest in maxillary central incisors, lateral incisors and canines, were measured. Results: The gingival thickness at 2 mm below the gingival margin of maxillary central incisors, lateral incisors and canines was (1.42±0.21), (1.19±0.17) and (1.23±0.20) mm respectively (F=12.47, P<0.001). The gingival thickness at 2 mm below gingival margin and 4 mm below crest of residual ridge in the male patients were (1.31±0.21) and (0.67±0.22) mm, and those in the female patients were (1.26±0.22) and (0.58±0.19) mm respectively, and there were statistically significant differences in the gingival thickness between the "2 mm below gingival margin" group and the "4 mm below crest of residual ridge" group (t=2.01 and 3.97, P<0.05). There was a positive correlation between gingival thickness and alveolar bone thickness at 2 mm and 4 mm below the crest of residual ridge in maxillary anterior region, and the correlation coefficients (r) were 0.387 and 0.344 respectively (P<0.05). Conclusions: Gingival thickness of maxillary anterior area is related to the tooth position and gender. The gingival thickness of men is greater than that of women.The gingival thickness at 2 and 4 mm below the crest of the alveolar crest is positively correlated with the thickness of the alveolar bone.

Analysis of the presence, location and morphometry of the «alveolar antral artery¼ by cone-beam computed tomography in Chilean adults / Análisis de la presencia, ubicación y morfometría de la arteria alvéolo-antral por tomografía computarizada de haz cónico en adultos chilenos

SUMMARY: The posterior superior alveolar artery is responsible for the vascularisation of the mucous which covers the posterior wall of the maxillary sinus, pulp and the periodontal tissues of upper molars. The collateral rami of the infraorbital artery irrigate the mucous of the anterior and lateral walls of the maxillary sinus, as well as the pulp and periodontal tissue of the upper anterior teeth and upper premolars. Both these arteries present intraosseous and extraosseous rami which form an anastomosis in the anterior and lateral walls of the maxillary sinus, called the alveolar antral artery (AAA). The aim of this study was to analyse the presence, location and morphometry of the AAA in a Chilean population, considering sex, side and age, using Cone-Beam computed tomography (CBCT). Forty-two CBCT examinations of Chilean adults were evaluated to analyse the presence, location (extraosseous, intraosseous or subperiosteal) and diameter (<1mm, 1-2 mm, 2-3 mm, >3 mm) of the AAA and the distance from the AAA to the amelocemental limit of the upper second premolar (2PM), permanent upper first molar (1M) and permanent upper second molar (2M) by sex and age range. Pearson's chi-squared test, Student's t-test, ANOVA and Pearson's correlation coefficient were applied, using a significance threshold of 5 %. AAA was found in 75 sides (89.3 %), 38 on the right side (90.5 %) and 37 on the left (88.09 %); extraosseous location was most common. More than 80 % of the arteries presented a diameter between 1 and 2 mm, with no important differences between sexes or age ranges. In younger individuals, the artery was located closer to the vestibular amelocemental limit than in older individuals. Carrying out a proper treatment plan which includes imagenological analysis before surgical procedures is essential to avoid possible haemorrhagic events in the region.

RESUMEN: Arteria alveolar superior posterior es responsable de la vascularización de la mucosa que recubre la pared posterior del seno maxilar, la pulpa y el tejido peridontal en el que se insertan los molares superiores. Las ramas colaterales de la arteria infraorbitaria irrigan la mucosa de las paredes anterior y lateral del seno maxilar, así como la pulpa y el periodonto de los dientes anteriores superiores y los premolares superiores. Ambas arterias presentan ramas intraóseas y extraóseas que forman una anastomosis en las paredes anterior y lateral del seno maxilar, denominada arteria alvéolo antral (AAA). El objetivo de este estudio fue analizar la presencia, localización y morfometría del AAA en una población chilena, considerando sexo, lado y edad, mediante tomografía computarizada Cone-Beam (CBCT). Se evaluaron 42 exámenes CBCT de adultos chilenos para analizar la presencia, ubicación (extraósea, intraósea o subperióstica) y diámetro (<1 mm, 1-2 mm, 2-3 mm,> 3 mm) del AAA. y la distancia del AAA al límite amelocemental del segundo premolar superior (2PM), primer molar superior permanente (1M) y segundo molar superior permanente (2M) por sexo y rango de edad. Se aplicaron la prueba de chi-cuadrado de Pearson, la prueba t de Student, ANOVA y el coeficiente de correlación de Pearson, utilizando un umbral de significancia del 5 %. Se encontró AAA en 75 lados (89,3 %), 38 del lado derecho (90,5 %) y 37 del lado izquierdo (88,09 %); la localización extraósea fue la más común. Más del 80 % de las arterias presentaban un diámetro entre 1 y 2 mm, sin diferencias importantes entre sexos ni rangos de edad. En individuos más jóvenes, la arteria se ubicó más cerca del límite amelocemental vestibular que en individuos mayores. La realización de un adecuado plan de tratamiento que incluya análisis imagenológico antes de los procedimientos quirúrgicos es fundamental para evitar posibles eventos hemorrágicos en la región.

Horizontal ridge augmentation of a single atrophic site in the anterior maxilla using hydroxyapatite and rhBMP-2 / Augmento óseo horizontal de reborde alveolar en sitio atrófico único en maxila anterior usando hidroxiapatita y rhBMP-2

SUMMARY: Bone morphogenetic protein (rhBMP-2) is a powerful osteo-inductive growth factor widely used in bone reconstruction and both the vehicle used to administer it and the scaffold substrate could determine its success in clinical situations. The aim was to analyse the clinical behaviour of dental implants placed in single alveolar ridges with a horizontal deficiency in the maxillary anterior region that were reconstructed horizontally with rhBMP-2 and porous hydroxyapatite (HA). Inclusion criteria were both males and females, between the ages of 18 and 29 with single tooth loss of one upper incisor. Cone Beam Computed Tomography (CBCT) was used to take measurements prior to bone augmentation and again prior to the implant insertion. Surgery was carried out under local anaesthetic. In the primary procedure, bone substitute was introduced using porous HA and rhBMP-2; after 4 to 5 months, dental implant surgery was carried out and the implant placed; after 3 months of consolidation the provisional prosthesis was placed and then a definitive restoration was placed. Variables were analysed using the t-test with a p-value of < 0.05 in order to assess statistical significance. Thirteen subjects were included (6 females and 7 males). Bone augmentation resulted in a bone gain of 4.15mm (p=0.023), which was shown to be statistically significant. All of the grafts placed were successful and 13 implants were placed, using torques between 30 and 70N, without complications. For the final prostheses, 11 were screw retained and 2 were cemented in place. The horizontal bone augmentation using HA and rhBMP-2 is an efficient technique for single bone defects in the anterior maxillary area; clinical trials on a larger scale are needed to confirm these results.

RESUMEN: La proteína ósea morfogenética (BMP-2) es un potente osteoinductor utilizado ampliamente en técnicas reconstructivas; el vehículo de instalación es determinante en su evolución. El objetivo fue analizar el comportamiento clínico de implantes dentales instalados en rebordes alveolares únicos con deficiencia horizontal del sector anterior reconstruida horizontalmente con BMP-2 e hidroxiapatita (HA) porosa. Fueron incluidos sujetos de ambos sexos de entre 18 y 29 años, con pérdida dentaria unitaria a nivel de incisivos superiores. Se utilizó tomografía computadorizada para realizar mediciones en las etapas previa a la instalación del injerto y previo a la instalación del implante. Las cirugías fueron realizadas bajo anestesia local. En la primera intervención se realizó la instalación del injerto óseo utilizando HA porosa y BMP-2; después de 4 a 5 meses se realizó la instalación del implante dental; 3 meses después se realizó la conexión protésica y rehabilitación final. Las variables fueron estudiadas con la prueba t test considerando el valor de p< 0,05 para considerar significancia estadística. Trece sujetos fueron incluidos (6 mujeres y 7 hombres); con la reconstrucción ósea se obtuvo una ganancia ósea de 4,15mm (p=0.023) que fue estadísticamente significativo. No existió pérdida en ningún injerto realizado; se instalaron 13 implantes con torques entre 30 y 70N sin complicaciones; se realizaron prótesis fijas atornilladas en 11 casos y cementadas en 2 casos. La técnica con HA y BMP- 2 es eficiente para reconstruir defectos horizontales en perdidas unitarias del sector anterior maxilar; ensayos clínicos de mayor escala son necesarios para confirmar estos resultados.

Prosthetically driven alveolar reconstructions: a retrospective study

Abstract This study aims to evaluate the post-extraction alveolar bone reconstruction amongst 12 patients exhibiting loss of buccal bone plate in a tooth of the anterior region of the maxilla using the prosthetically-driven alveolar reconstruction technique (PDAR). In PDAR, a partial fixed provisional prosthesis (PFPP [conventional or adhesive]) with a specially designed pontic maintains the clot in a mechanically stable position during alveolar regeneration. Moreover, the pontic design, in hourglass shape and located in the subgingival area, also prevents gingival margins from collapsing. Gingival recession was evaluated through the 6-month healing period. Cone beam computed tomography (CBCT) was performed 1 month before and 8 months after PDAR treatment. For the primary outcome, in the panoramic imaging, the central area of bone defect in each tooth was selected for linear measurements. Measurements of the vertical buccal bone gain and the gain in thickness in the alveolar bone crest were obtained 8 months after PDAR. Descriptive statistics and intraclass correlation coefficient analysis were conducted. After treatment, all patients showed bone formation (a mean vertical gain of 7.1±3.7 mm, associated with a horizontal mean gain of 4.5±1.4 mm in the alveolar bone crest). The intraclass correlation coefficient for the measurements performed using CBCT was 0.999. No gingival recession, greater than 1 mm, was observed. Lower-morbidity procedures without the use of biomaterials may be a useful in post-extraction alveolar ridge regeneration and/or preservation. PDAR promoted alveolar bone formation without flaps, grafts and membranes.

Resumo Este estudo teve como objetivo avaliar a reconstrução do osso alveolar após extração em 12 pacientes com perda da tábua óssea vestibular em dentes na região anterior da maxila usando a técnica da reconstrução alveolar proteticamente guiada (RAPG). Na RAPG, uma prótese parcial fixa provisória (PPFP [convencional ou adesiva]) com um pôntico com design específico mantém o coágulo numa posição mecanicamente estável. Além disso, o design do pôntico, com formato de ampulheta e localizado na área subgengival, também previne o colapso das margens gengivais. A recessão gengival foi avaliada durante o período de cicatrização de 6 meses. Tomografias computadorizadas cone beam (TCCB) foram feitas 1 mês antes e 8 meses após o tratamento com a RAPG. Para o desfecho primário, nas imagens panorâmicas, a área central do defeito ósseo em cada dente foi selecionada para as medições lineares. As medições do ganho vertical ósseo vestibular e do ganho em espessura na crista óssea alveolar foram realizadas. A análise estística descritiva e a análise do coeficiente de correlação intraclasse forma realizados. Após o tratamento, todos os pacientes apresentaram formação óssea (ganho vertical médio de 7,1±3,7 mm, associado a ganho horizontal médio de 4,5±1,4 mm na crista óssea alveolar). O coeficiente de correlação intraclasse foi de 0,999. Nenhuma retração gengival acima de 1 mm foi observada. Procedimentos com baixa morbidade sem o uso de biomateriais podem ser úteis na regeneração/preservação do rebordo após as extrações. A RAPG promove a formação do osso alveolar sem o uso de retalhos, enxertos e membranas.

Vestibular Alveolar bone height measurement: Accuracy and Correlation between direct and indirect techniques / Medición de la altura del hueso alveolar vestibular: precisión y correlación entre técnicas directa e indirecta

ABSTRACT Cone Beam Computed Tomography (CBCT) has modified the perspective of dentistry images, providing manipulable threedimensional images with a 1:1 patient:image ratio. Treatments and diagnosis are modified or corroborated by CBCT; however, its accuracy in thin structures such as cortical bone has been subjected to critical review. The aim of this study is to correlate the measurement of vestibular alveolar bone height using direct measurements and measurements performed with conebeam tomographic images with standard (SD) voxel resolution. Thirty incisor and premolar teeth of patients undergoing open curettage were measured with a highprecision caliper and with Cone Beam Computed Tomography (CBCT) at an SD resolution of 0.16 mm voxels in a 3D Orthophos XG Sirona scanner. Intraobserver evaluation was performed using the intraclass correlation coefficient (ICC). Direct measurements and CBCT measurements were correlated using Pearson correlation (PCC). The mean difference between indirect and direct measurements was 3.15 mm. Paired t test and Pearson Correlation coefficient determined that all measurements differed statistically from each other with p<0.05. With the CT scanner and protocol used in this study, CBCT images do not enable accurate evaluation of vestibular alveolar bone height.

RESUMEN La tomografía de haz cónico (CBCT) ha modificado la perspectiva de la imagenología en odontología que brinda una imagen tridimensional manipulable con una relación 1:1, paciente: imagen. Los tratamientos y diagnósticos se ven modificados o corroborados por el CBCT; sin embargo, la exactitud que presenta en estructuras delgadas como las corticales óseas ha sido sometida a críticas. El objetivo fue correlacionar la medición de la altura del hueso alveolar vestibular mediante mediciones directas y las realizadas con imágenes tomográficas de haz cónico con resolución de vóxel estándar (SD). Treinta dientes incisivos y premolares de pacientes sometidos a un curetaje abierto se midieron con un calibrador de alta precisión y una tomografía computarizada de haz cónico (CBCT) a una resolución SD de 0,16 mm de vóxeles en un escáner 3D Orthophos XG Sirona. La evaluación intraobservador se realizó utilizando el coeficiente de correlación intraclase (ICC), y las mediciones directas y las mediciones CBCT se correlacionaron utilizando la correlación de Pearson (PCC). La diferencia media entre las mediciones indirectas y directas fue de 3,15 mm. La prueba t pareada y el Coeficiente de Correlación de Pearson determinaron que todas las mediciones fueron estadísticamente diferentes entre sí con una p <0.05. Con el escáner de TC y el protocolo utilizado en este estudio, las imágenes CBCT no permiten una evaluación precisa de la altura del hueso alveolar vestibular.

Prevalence of horizontal alveolar changes in edentulous patients: a retrospective tomographic study

Abstract Horizontal bone loss after tooth extraction is a common finding that demands bone reconstruction in various cases. The aim of this study was to assess the horizontal alveolar status in partially and completely edentulous patients using cone-beam computed tomography (CBCT). In total, 1516 CBCT scans of 1404 adult patients were analyzed. Assessment of the images was performed in accordance with the previously published horizontal alveolar change (HAC) classification, which categorizes horizontal bone defects into four classes: HAC 1, HAC 2, HAC 3 and HAC 4 (from the least severe to the most severe condition). Analysis of 1048 scans from partially edentulous patients presented a distribution of 63.55%, 22.14%, 13.36% and 0.95% in HAC 1, HAC 2, HAC 3 and HAC 4, respectively. Analysis of 468 scans from completely edentulous patient images presented a distribution of 19.87%, 28.63%, 41.67% and 9.83% in HAC 1, HAC 2, HAC 3 and HAC 4, respectively. Based on these results, as in HAC 4, no cancellous bone was found between the cortical buccal and lingual/palatal bone plates, it seems reasonable to state that the absence of cancellous bone is higher in completely edentulous patients than in partially edentulous patients. Therefore, the absence of cancellous bone seems to be higher in completely edentulous than in partially edentulous patients.

Morphometric predictors of lingual undercut depth in the posterior mandible and their relevance to immediate dental implant insertion: recommendations for CBCT / Predictores morfométricos de la profundidad de la «undecurt¼ lingual en la parte posterior de la mandíbula y su relevancia para la inserción inmediata de implantes dentales: recomendaciones para la CBCT

Deep lingual undercut (LU) is commonly encountered in the posterior mandible, and is considered a risk factor in dental implants. In this study we investigated the value of data extracted from OPGs in predicting LU depth. Such predictors might be valuable in reducing the chance of lingual plate perforation (LPP) by recommending CBCTs prior to dental implant insertion when deep LU is anticipated We aimed at assessing the following variables as potential predictors of LU depth: 1) alveolar process height (measured on OPGs), 2) alveolar process width (measured on CBCTs), and 3) the distance from apical region of dental alveoli to superior margin of IAN canal (measured on OPGs). 128 CBCTs and corresponding OPGs of posterior mandibles of 128 patients (70 females, 58 males; age range=18-87 years, mean age=45.8 years, SD=17.0 years) were used. Only dentate sites of lower first (LM1) and second molars (LM2) were considered. Four predictors of LU depth were found, the strongest was the ratio between alveolar process width (which could be assessed clinically) and alveolar process height as measured on OPGs (r=.454 at LM1 site, r=.592 at LM2 site). Predictors derived from OPG measurements might be valuable in anticipating LU depth and might be more valuable when combined with alveolar process width (which might be assessed clinically). We recommend considering the suggested predictors in assessing the need of CBCT prior to immediate dental implant insertion in posterior mandible.

El socavado lingual profundo (SLU) se encuentra comúnmente en la porción posterior de la mandíbula y es considerado un factor de riesgo en los implantes dentales. En este estudio, investigamos el valor de los datos extraídos de los OPG para predecir la profundidad del SLU. Dichos predictores podrían ser valiosos para reducir la posibilidad de perforación de la placa lingual (PPL) recomendando CBCT antes de la inserción del implante dental cuando se anticipa un SLU. El objetivo consistió en evaluar las siguientes variables como posibles predictores de profundidad de SLU: 1) altura del proceso alveolar (medida en OPG), 2) ancho del proceso alveolar (medido en CBCT) y 3) la distancia desde la región apical de los alvéolos dentales al margen superior del canal IAN (medido en OPG). Se utilizaron 128 CBCT y las OPG correspondientes de mandíbulas de 128 pacientes (70 mujeres, 58 hombres; rango de edad = 18-87 años, edad media = 45,8 años, SD = 17,0 años). Sólo se consideraron los sitios dentados de los primeros molares inferiores (LM1) y los segundos molares inferiores (LM2). Se encontraron cuatro predictores de profundidad de SLU, el más fuerte fue la relación entre el ancho del proceso alveolar (que podría evaluarse clínicamente) y la altura del proceso alveolar medida en OPG (r = 0,454 en el sitio LM1, r = 0,592 en el sitio LM2). Los predictores derivados de las mediciones de OPG podrían ser valiosos para anticipar la profundidad de SLU y podrían ser más valiosos cuando se combinan con el ancho del proceso alveolar (que podría evaluarse clínicamente). Recomendamos considerar los factores predictivos sugeridos para evaluar la necesidad de CBCT antes de la inserción inmediata del implante dental en la porción posterior de la mandíbula.

Relationship between mandibular symphysis dimensions and mandibular anterior alveolar bone thickness as assessed with cone-beam computed tomography

ABSTRACT Objective: To determine the relationship between symphysis dimensions and alveolar bone thickness (ABT) of the mandibular anterior teeth. Methods: Cone-beam computed tomography images of 51 patients were collected and measured. The buccal and lingual ABT of the mandibular anterior teeth was measured at 3 and 6 mm apical to the cemento-enamel junction (CEJ) and at the root apices. The symphysis height and width were measured. The symphysis ratio was the ratio of symphysis height to symphysis width. Kendall's tau correlation coefficient was used to determine the relationships between the variables at a 0.05 significance level. Results: The mandibular anterior teeth lingual and apical ABT positively correlated with symphysis width (p<0.05). Moreover, these thicknesses negatively correlated with the symphysis ratio (p<0.05). Symphysis widths and ratios showed higher correlation coefficients with total and buccal apical ABT, compared with lingual ABT. Buccal ABT at 3 and 6 mm apical to the CEJ was not significantly correlated with most symphysis dimensions. The mean thickness of the buccal alveolar bone at the upper root half was only 0.2-0.6 mm, which was very thin, when compared with other regions. Conclusion: For mandibular anterior teeth, the apical alveolar bone and lingual alveolar bone tended to be thicker in patients with a wide and short symphysis, compared to those with a narrow and long symphysis. Buccal alveolar bone was, in general, very thin and did not show a significant relationship with most symphysis dimensions.

RESUMO Objetivo: o objetivo desse artigo foi avaliar a correlação entre as dimensões da sínfise e a espessura do osso alveolar (EOA) na região anterior da mandíbula. Métodos: imagens de tomografia computadorizada de feixe cônico (TCFC) de 51 pacientes foram selecionadas e medidas. As EOAs vestibular e lingual dos dentes anteroinferiores foram medidas a 3 mm e a 6 mm para apical da junção cemento-esmalte (JCE) e nos ápices radiculares. A altura e a largura da sínfise foram medidas, e calculou-se a proporção entre ambas, chamada de proporção da sínfise. O coeficiente de correlação tau de Kendall foi utilizado para determinar a correlação entre as variáveis, com nível de significância de 0,05. Resultados: as EOAs vestibular e lingual dos dentes anteroinferiores apresentaram correlação positiva com a largura da sínfise (p< 0,05). Porém, essas EOAs apresentaram correlação negativa com a proporção da sínfise (p <0,05). A largura e a proporção da sínfise apresentaram maiores coeficientes de correlação com a EOA total e vestibular apical e, em comparação com a EOA lingual. A EOA vestibular a 3 mm e a 6 mm para apical da JCE não apresentou correlação significativa com a maioria das dimensões da sínfise. A espessura média do osso alveolar vestibular na metade superior da raiz foi de apenas 0,2 a 0,6 mm - muito delgada quando comparada com outras regiões. Conclusão: nos dentes anteroinferiores, o osso alveolar apical e o osso alveolar lingual tendem a ser mais espessos nos pacientes com sínfise mais larga e curta, em comparação àqueles com sínfise mais estreita e longa. O osso alveolar vestibular foi, em geral, muito fino e não apresentou relação significativa com a maioria das dimensões da sínfise.

Accuracy analysis of alveolar dehiscence and fenestration of maxillary anterior teeth of Angle class III by cone-beam CT / 北京大学学报(医学版)

OBJECTIVE@#To evaluate the accuracy and reliability of detecting alveolar bone dehiscence and fenestration of maxillary anterior teeth of Angle class III by cone-beam computed tomography (CBCT).@*METHODS@#Eighteen Angle class III patients with 108 maxillary anterior teeth were included (3 males and 15 females) who accepted modified corticotomy in orthodontic therapy. The mean age was 23.6 years (18-30 years). The clinical detection of dehiscence and fenestration was done when modified corticotomy was performed by the same periodontist. The CBCT examination was conducted pre-operation and the detection of dehiscence and fenestration by CBCT was done by two periodontists. The data in modified corticotomy were used as the golden standard to calculate the parameters, such as sensitivity, specificity, positive and negative predictive values, Youden index (YI), positive and negative likelihood ratio. Kappa statistic was used to analyze the agreement between the clinical detection and the CBCT detection.@*RESULTS@#The incidence of dehiscence and fenestration was about 10.19% and 13.89% respectively, which mainly occurred on lateral incisors and canines. The median values of length and width of dehiscence were about 5 mm and 4 mm, and the median values of length and width of fenestration were 3 mm and 2 mm, respectively. Most fenestrations were detected on the middle third to the apical third of the root. For dehiscence, the agreement between clinical detection and CBCT detection was statistically significant (P<0.05). For fenestration, the agreement between clinical detection and CBCT detection was statistically significant (P<0.05). The values of sensitivity and specificity for detecting dehiscence were more than 0.7. The values of positive and negative predictive values for detecting dehiscence were 0.44 and 0.97. The values of sensitivity and specificity for detecting fenestration were 0.93 and 0.52. The values of positive and negative predictive values for detecting fenestration were 0.24 and 0.98.@*CONCLUSION@#For dehiscence, the agreement between clinical detection and CBCT detection was good. For fenestration, the agreement between clinical detection and CBCT detection was general. Detection of dehiscence and fenestration of maxillary anterior teeth of Angle class III by CBCT had limited diagnostic value in clinical practice with overestimation of dehiscence and fenestration incidence.

Morphological analysis of alveolar bone of anterior mandible in high-angle skeletal class II and class III malocclusions assessed with cone-beam computed tomography / 北京大学学报(医学版)

OBJECTIVE@#To evaluate the difference of features of alveolar bone support under lower anterior teeth between high-angle adults with skeletal class II malocclusions and high-angle adults presenting skeletal class III malocclusions by using cone-beam computed tomography (CBCT).@*METHODS@#Patients who had taken the images of CBCT were selected from the Peking University School and Hospital of Stomatology between October 2015 and August 2017. The CBCT archives from 62 high-angle adult cases without orthodontic treatment were divided into two groups based on their sagittal jaw relationships: skeletal class II and skeletal class III. vertical bone level (VBL), alveolar bone area (ABA), and the width of alveolar bone were measured respectively at the 2 mm, 4 mm, 6 mm below the cemento-enamel junction (CEJ) level and at the apical level. After that, independent samples t-tests were conducted for statistical comparisons.@*RESULTS@#The ABA of the mandibular alveolar bone in the area of lower anterior teeth was significantly thinner in the patients of skeletal class III than those of skeletal class II, especially in terms of the apical ABA, total ABA on the labial and lingual sides and the ABA at 6 mm below CEJ level on the lingual side (P<0.05). The thickness of the alveolar bone of mandibular anterior teeth was significantly thinner in the subjects of skeletal class III than those of skeletal class II, especially regarding the apical level on the labial and lingual side and at the level of 4 mm, 6 mm below CEJ level on the lingual side (P<0.05).@*CONCLUSION@#The ABA and the thickness of the alveolar bone of mandibular anterior teeth were significantly thinner in the group of skeletal class III adult patients with high-angle when compared with the sample of high-angle skeletal class II adult cases. We recommend orthodontists to be more cautious in treatment of high-angle skeletal class III patients, especially pay attention to control the torque of lower anterior teeth during forward and backward movement, in case that the apical root might be absorbed or fenestration happen in the area of lower anterior teeth.

Maxillary sinus floor pneumatization and alveolar ridge resorption after tooth loss: a cross-sectional study

Abstract This is a cross-sectional study that aimed to estimate maxillary sinus floor (MSF) pneumatization in single missing tooth of posterior maxilla, by using cone-beam computed tomography (CBCT). CBCT images were analyzed bilaterally and divided into 2 groups: edentulous site (EdS) - edentulous single region of upper second premolar, first or second molars; Tooth site (TS) - contralateral region homologous to the EdS region, with tooth present. Variables evaluated were: sinus height (SH), estimated sinus pneumatization (eSP: ∆ EdS - TS), healed ridge height (HR) and presence of localized sinus pneumatization (LSP) in molars teeth at TS. HR were categorized according to therapeutic option for posterior maxilla. 183 CBCT scans were included and it was observed that EdS presented a higher SH than the TS (p < 0.001) showing an eSP of 0.9 ± 2.93 mm. First molars presented the highest SH for both sides, although significant differences were detected when compared to second molars. First molars were mostly affected by LSP at TS (36 out of 43). Individuals with LSP at TS presented lower HR than the ones without LSP (p < 0.05). 54% of the cases presenting LSP obtained HR < 5 mm, which indicates sinus lift surgery. The present study showed that tooth loss in posterior maxilla favors sinus pneumatization and the identification of LSP at molar roots seems to indicate a greater necessity for sinus lift surgeries.

Dehiscences and fenestrations: methodological care necessary to avoid errors in diagnosis and measurement

ABSTRACT The low prevalence of gingival recessions observed in orthodontic clinical practice may be assigned to the fact that in studies in which dehiscences and bone fenestrations are described as frequent, they were diagnosed based on: 1) dry skull studies; 2) areas with periosteal reflection together with flap; and 3) imaging techniques with low sensitivity to detect these defects, which have a delicate structure and function. In areas of pseudo-dehiscences and fenestrations, the periosteum and the alveolar cortical bone are very thin; also, they either have been removed during preparation of the dry specimens in the areas for analysis, or, alternatively, have not been investigated using an ideal imaging method.

RESUMO A ausência de prevalência elevada das recessões gengivais relacionadas à prática clínica ortodôntica se explica, provavelmente, porque, nos trabalhos em que as deiscências e fenestrações ósseas são descritas como frequentes, essas foram diagnosticadas a partir de: 1) estudos em crânios secos; 2) áreas com rebatimento periosteal junto com o retalho; e 3) uso de métodos imagiológicos que falham em sensibilidade para captá-las, pela sua delicadeza estrutural e funcional. Nessas áreas de pseudodeiscências e fenestrações, existe periósteo e cortical óssea alveolar muito fina, que foram eliminados nos procedimentos de preparação dos espécimes secos, nas áreas para a análise ou, então, não se aplicou um método imagiológico ideal.

Three dimensional evaluation of alveolar bone changes in response to different rapid palatal expansion activation rates

ABSTRACT Introduction: The aim of this multi-center retrospective study was to quantify the changes in alveolar bone height and thickness after using two different rapid palatal expansion (RPE) activation protocols, and to determine whether a more rapid rate of expansion is likely to cause more adverse effects, such as alveolar tipping, dental tipping, fenestration and dehiscence of anchorage teeth. Methods: The sample consisted of pre- and post-expansion records from 40 subjects (age 8-15 years) who underwent RPE using a 4-banded Hyrax appliance as part of their orthodontic treatment to correct posterior buccal crossbites. Subjects were divided into two groups according to their RPE activation rates (0.5 mm/day and 0.8 mm/day; n = 20 each group). Three-dimensional images for all included subjects were evaluated using Dolphin Imaging Software 11.7 Premium. Maxillary base width, buccal and palatal cortical bone thickness, alveolar bone height, and root angulation and length were measured. Significance of the changes in the measurements was evaluated using Wilcoxon signed-rank test and comparisons between groups were done using ANOVA. Significance was defined at p ≤ 0.05. Results: RPE activation rates of 0.5 mm per day (Group 1) and 0.8 mm per day (Group 2) caused significant increase in arch width following treatment; however, Group 2 showed greater increases compared to Group 1 (p < 0.01). Buccal alveolar height and width decreased significantly in both groups. Both treatment protocols resulted in significant increases in buccal-lingual angulation of teeth; however, Group 2 showed greater increases compared to Group 1 (p < 0.01). Conclusion: Both activation rates are associated with significant increase in intra-arch widths. However, 0.8 mm/day resulted in greater increases. The 0.8 mm/day activation rate also resulted in more increased dental tipping and decreased buccal alveolar bone thickness over 0.5 mm/day.

RESUMO Introdução: o objetivo do presente estudo retrospectivo multicêntrico foi quantificar as alterações na altura e na espessura do osso alveolar após o uso de dois diferentes protocolos de ativação na expansão rápida da maxila (ERM), bem como determinar se uma taxa de expansão mais rápida tem maior probabilidade de causar mais efeitos adversos, tais como inclinação dos dentes e do processo alveolar, fenestração e deiscência dos dentes de ancoragem. Métodos: a amostra consistiu de registros pré- e pós-expansão de 40 indivíduos (com idades entre 8 e 15 anos) que se submeteram à expansão rápida da maxila usando o aparelho Hyrax com quatro bandas como parte de seu tratamento ortodôntico para correção da mordida cruzada posterior. Os indivíduos foram divididos em dois grupos, de acordo com a taxa de ativação na expansão rápida da maxila (0,5 mm/dia e 0,8 mm/dia; n = 20 cada grupo). Imagens tridimensionais de todos os indivíduos da amostra foram avaliadas com o uso do software Dolphin Imaging v. 11.7 Premium. Foram analisadas as seguintes medidas: largura da base da maxila, espessura das corticais ósseas vestibular e lingual, altura do osso alveolar, angulação e comprimento das raízes. A significância das alterações nessas medidas foi avaliada com o teste não paramétrico de Wilcoxon e as comparações entre os grupos foram feitas usando a ANOVA. A significância foi definida como p ≤ 0,05. Resultados: as taxas de ativação na ERM de 0,5mm/dia (Grupo 1) e 0,8mm/dia (Grupo 2) causaram aumento significativo na largura da arcada após o tratamento. Porém, o Grupo 2 apresentou maior aumento, se comparado ao Grupo 1 (p < 0,01). A altura e a largura do osso alveolar vestibular diminuíram significativamente em ambos os grupos. Ambos os protocolos de tratamento resultaram em aumento significativo na inclinação vestibulolingual dos dentes. Porém, o Grupo 2 apresentou maior aumento, em comparação ao Grupo 1 (p < 0,01). Conclusão: ambas as taxas de ativação estão associadas a um aumento significativo nas larguras intra-arcada; entretanto, a taxa de 0,8mm/dia resultou em maior aumento. Essa mesma taxa de ativação também resultou em maior inclinação dos dentes e em redução mais acentuada da espessura do osso alveolar vestibular.

Root length and alveolar bone level of impacted canines and adjacent teeth after orthodontic traction: a long-term evaluation

Abstract Objective The aim of this retrospective study was to evaluate the long-term effects of orthodontic traction on root length and alveolar bone level in impacted canines and adjacent teeth. Material and Methods Sample consisted of 16 patients (nine males and seven females), mean initial age 11 years and 8 months presenting with unilaterally maxillary impacted canines, palatally displaced, treated with the same surgical and orthodontic approach. Teeth from the impacted-canine side were assigned as Group I (GI), and contralateral teeth as control, Group II (GII). The mean age of patients at the end of orthodontic treatment was 14 years and 2 months and the mean post-treatment time was 5 years and 11 months. Both contralateral erupted maxillary canines and adjacent teeth served as control. Root length and alveolar bone level (buccal and palatal) were evaluated on cone-beam computed tomography (CBCT) images. The comparison of root length and alveolar bone level changes between groups were assessed by applying paired t-test, at a significance level of 5% (p<0.05). Results There were no statistically significant differences in root length and buccal and palatal bone levels of canines and adjacent teeth among groups. Conclusions Impacted canine treatment by closed-eruption technique associated with canine crown perforation, has a minimal effect on root length and buccal and palatal alveolar bone level in both canine and adjacent teeth, demonstrating that this treatment protocol has a good long-term prognosis.

Morphological characteristics of the facial bone wall related to the tooth position in the alveolar crest in the maxillary anterior / Características morfológicas de la tabla ósea vestibular en relación a la posición dentaria en la cresta alveolar en la zona anterior del maxilar superior

The purpose of this study was to analyze whether the position of the tooth in the alveolar ridge influences the thickness of the facial bone wall and the distance between the cementoenamel junction (CEJ) and osseous zenith (OZ). Conebeam computed tomography (CBCT) scans from fifty four dentate patients were included in the study (22 male and 32 female, mean age 41.5 years). The measurements taken included: (1).The Facial bone thickness at 7 different equidistant levels measuring levels (ML 17) between OZ and the root apex (A). (2) The CEJ OZ distance. (3) Facial position of the tooth (FPT) relative to a straight line traced from mesial to distal interproximal depressions of the alveolar plate at the level of the CEJ. The Facial bone wall thickness ranged between 0 mm and 3.8 mm, with greater values at more apical levels. Mean values were smaller than 1 mm at every level except ML7. The CEJOZ distance varied between 0.5 mm and 6.9 mm (mean 2.9 mm). The Mean of FPT value was 0.6 mm. No statistically significant correlation was found between FPT and the CEJOZ distance. Weak negative statistically significant correlations were found between FPT and the thickness of the facial bone wall at MP1 and MP3. Within the limits of this study, no clinically relevant correlation between FPT and facial bone thickness ­ CEJOZ distance was found. More studies should be conducted to evaluate a greater number of teeth, especially those that may present misalignment with greater FPT values (AU)

El objetivo del presente estudio fue analizar si la posición de la pieza dentaria en el reborde alveolar influencia el espesor de la tabla ósea vestibular y la distancia entre el limite amelocementario (LAC) y el cenit óseo (CO). Tomografías computadas haz de cono (TC) de 54 pacientes dentados fueron incluidas en el estudio (22 hombres y 32 mujeres, edad promedio 41.5 años). Las medidas registradas fueron: (1) espesor de la tabla ósea vestibular en 7 diferentes niveles de medición (NM 17) entre CO y el ápice radicular (AR). (2) La distancia LACCO. (3) Posición vestibular de la pieza dentaria (PVD) en relación a una línea recta trazada desde la depresión interproximal mesial a la depresión interproximal distal de la tabla ósea a nivel del LAC. El espesor de la tabla ósea vestibular fue 03.8mm, con valores mayores registrados a nivel más apical. El valor promedio fue menor a 1 mm excepto en NM7. La distancia LACCO varió entre 0.5 y 6.9mm (promedio 2.9mm). El promedio de PVD fue de 0.6mm. No se encontró correlación estadísticamente significativa entre la PVD y la distancia LACCO. Se halló una correlación débil negativa estadísticamente significativa entre la PVD y el espesor de la tabla ósea vestibular en NM1 y NM3. Dentro de las limitaciones de este estudio, no se encontró una correlación clínicamente significativa entre PVD y espesor de la tabla ósea vestibular ­ distancia LACCO. Se deben llevar a cabo más estudios para evaluar un mayor número de piezas dentarias, especialmente aquellas que se encuentran desalineadas con valores PVD mayores (AU)

Effects of alveolar bone displacement with segmental osteotomy: micro-CT and histomorphometric analysis in rats

Abstract The purpose of this study was to evaluate the effects of segmental osteotomy on the blood vessels and osteoclasts in rats using micro-computed tomography (micro-CT) and histomorphometric analysis. After segmental osteotomy was performed around the maxillary first molars of 36 male Sprague-Dawley rats (n = 72), the samples were divided into a control group (no displacement), 0.5 D group (0.5 mm buccal displacement) and 1.0 D group (1.0 mm buccal displacement) (n = 24/group). At 1, 2, 4 and 8 weeks after surgery, changes in the blood vessel volume were investigated using micro-CT with perfusion of radiopaque silicone rubber. Tartrate-resistant acid phosphatase (TRAP) staining was used for histomorphometric analysis. Two-way repeated measures analysis of variance (rmANOVA) was performed to compare the volume of blood vessels and number of TRAP-positive osteoclasts among the groups. Regarding blood vessel volume, the displacement groups had no significant effects, while the time points had significant effects (p = 0.014). The blood vessel volume at 1 week was significantly smaller than that at 2, 4, and 8 weeks (p = 0.004, p = 0.026, and p = 0.005, respectively). Regarding TRAP cell count, the displacement groups had no significant effects, while the time points had significant effects (p < 0.001). The number of TRAP-positive osteoclasts at 8 weeks was significantly smaller than that at 1, 2, and 4 weeks (p < 0.001, p < 0.001, and p = 0.002, respectively), and the count at 4 weeks was smaller than that at 1 week (p = 0.011). Therefore, a regional osteoclast-related acceleratory phenomenon was maintained until 4 weeks after surgery.

Location and classification of Canalis sinuosus for cone beam computed tomography: avoiding misdiagnosis

Abstract The aim of this study was to assess the presence, location and, multiplanar distance of the canalis sinuosus (CS) between the incisive foramen and the anterior maxillary alveolar ridge using cone beam computed tomography (CBCT). Therefore, 500 CBCT maxillary images obtained from male and female patients aged 20 to 80 years were selected to assist in the dental treatment. Low-quality tomographic images were discarded. All images were captured with the i-CATTM Classic tomograph and assessed using the XoranCatTM software. The axial sections were analyzed at the incisive foramen in order to verify the CS presence in laterality and location. Furthermore, linear measurements of the nasal cavity floor, buccal cortical bone, and alveolar ridge crest were made. All the collected data were statistically analyzed. Results show a variation of the CS in relation to the classification and distance of anatomical structures, but no significant difference between the right and left sides. It should be highlighted that CBCT is necessary before invasive procedures in order to preserve important anatomical structures. In conclusion, the location of the CS varies in relation to the alveolar ridge crest and buccal cortical bone, assuming that it is going to be located by the upper lateral incisor palatine.

Alveolar bone mass in pre- and postmenopausal women with serum calcium as a marker: A comparative study.

Context: In most women bone mass reaches its peak in the third decade of life and declines thereafter with the onset of menopause and might lead to osteoporosis. Osteoporosis may result in reduced jaw bone mass and alterations of the mandibular structure. Qualitative and quantitative indices have been used for panoramic radiographs to assess the alveolar bone quality. Aims: The purpose of this study was to compare the alveolar bone quality of premenopausal and postmenopausal women using the panoramic mandibular index (PMI). This study also aimed to estimate the levels of serum calcium in premenopausal and postmenopausal women. Settings and Design: Single centre case control study. Materials and Methods: A total of 30 patients were divided into three groups of ten each - the healthy group, control group, and study group. Alveolar bone mass was evaluated by the PMI. Serum calcium was also assessed for all the patients. Statistical analysis used: The results obtained were subjected to statistical analysis by one-way analysis of variance using Statistical Software SPSS version 17, Tukey test for comparision, Pearson's correlation coefficient was employed. Results: Premenopausal women had the highest values for alveolar cortical bone mass as recorded by the PMI, followed by postmenopausal women with a healthy periodontium. The lowest values were recorded in the group of postmenopausal women with chronic generalized periodontitis. Similar results were found for serum calcium values. Conclusion: Postmenopausal women exhibit a reduced alveolar bone mass and lowered levels of serum total calcium with the increasing age. These changes may be useful indicators for low skeletal bone mineral density or osteoporosis.

Treatment of human periodontal infrabony defects with hydroxyapatite+ β tricalcium phosphate bone graft alone and in combination with platelet rich plasma: A randomized clinical trial.

Background: The present study was aimed at comparing the clinical effectiveness of two regenerative techniques - platelet rich plasma (PRP) + bone graft (HA + β TCP) versus bone graft (HA + β TCP) + normal saline in the treatment of periodontal intrabony defects. Materials and Methods: Ten patients diagnosed with chronic periodontitis were enrolled in a randomized split mouth clinical trial. Following phase I therapy the sites were randomly assigned to the test group - PRP + bone graft (HA + β TCP) and control group - saline + bone graft (HA + β TCP). Clinical parameters recorded at baseline and 6 months included plaque index, probing pocket depth, relative attachment levels, and relative gingival margin levels. Hard tissue evaluation was done using digital radiography to evaluate the image intensity and therefore the radioopacity of a desired region of interest in the intrabony defect. Pre- and postoperative comparisons were made between the treatment groups at 6 months. Results: Test group sites showed a significantly higher reduction in pocket depth compared to control group sites. Test group sites showed a significantly higher amount of radioopacity in the regions of interest, indicative of better graft remodeling, compared to control group sites. Conclusion: (HA + β TCP) bone graft appears to be a beneficial material in the treatment of human periodontal intrabony defects. When combined with platelet-rich plasma there is a significantly higher reduction in probing pocket depth, higher gain in attachment levels and higher amount of radio-density seen in the intrabony defects.